Bent-over T-Bar Row. What muscles work, execution technique

An effective technique for the development of the spinal muscles is considered T-bar deadlift. To create more load, the exercise is recommended to be performed in an incline. Nowadays this conservative technique is being replaced by newfangled and more functional equipment, but old-school athletes continue to prefer it.

What is the Bent Over T Bar Row?

The peculiarity of strength training is to fix only one end of the sports equipment. This technique does not provide for the need to control the trajectory of the rod. Only the dorsal muscles take part in the work. The stabilizing muscles are not used. There are machines that allow you to do the exercises while standing or lying down.

The classic technique is to push the free end of the sports equipment against the floor surface. Pancakes of the desired mass are hung on the other slice. For pumping muscles in the horizontal plane, use a special V-shaped handle.

T-bar row in the slope provides the ability to change the load vector with an emphasis on the upper segment of the dorsal muscles or on the lower part of the latissimus muscle. To do this, change the direction of the power voltage to the body from the belt to the chest and vice versa.

In accordance with the width of the grip and the angle of inclination of the stays, different muscle groups are included in the work. Exercise is considered basic for the rapid build-up of muscle mass.

The barbell is often replaced with dumbbells, which reduces axial stress on the spinal column and concentrates efforts on pumping the spinal muscles. The technique in accordance with the thrust vector increases the thickness or width of the target muscle group.

What muscles work?

The exercise predominantly loads the pulling tissue. The muscular structures involved in the performance of the athletic technique are shown in the table below.

Additionally, the exercise involves muscles that stabilize the position of the body in space.

These include:

• extensors of the spinal column;
• abdominal muscle group, including the deepest layers around the waist;
• gluteal;
• femoral;
• calf.

The wide range of muscle groups that work during the exercise makes it basic, effective and in demand by athletes.

Contraindications for implementation

Sports technology creates significant axle loads.

Exercise is prohibited when:

• umbilical hernia;
• protrusions of the vertebral and cervical regions - pathological processes, which are characterized by bulging of discs into the spinal canal without rupture of the annulus fibrosus;
• degenerative changes in muscle structures;
• traumatic injuries of skeletal bones;
• ruptures of ligaments and tendons.

In the presence of some contraindications, the T-draft can be performed with emphasis. To do this, use a gymnastic bench. Changes in technique keep axial thrust to a minimum.

Loading movements within a precisely specified amplitude relieve tension from the extensor muscles of the spinal column. Deliberate violation of the technique of performing the exercise allows you to achieve the intended result with an insignificant risk of injury or aggravation of the existing damage.

In the absence of specialized exercise equipment, you can install a regular gymnastic bench at an angle of 30-45 °. With its help, the traction of sports equipment to the lower back is performed.

The loads generated in this case are classified as isolated. The latissimus dorsi muscle works in a different mode. Another suitable option in the presence of contraindications is traction in the horizontal functional plane on a lever or block device with a low operating weight.

Choosing the right equipment and machine for the exercise

Bent-over T-Bar Rows can be performed on sports equipment of various models and modifications. Lever simulators are suitable, on which they work in a standing position.

The exercise can be performed on sports equipment with an incline board. On such a device, they work in a position with an emphasis on the chest. In the absence of appropriate simulators, you can use a conventional barbell with a T-shaped bar as an inventory.

One end of it is pressed against the surface of the floor, block handles are hooked on the other cut and pancake weights are strung. Regardless of the design features of the devices used, the technique of work remains unchanged. The loads are gradually increased to develop the target muscle groups.

The main mistakes when doing the exercise

When using training techniques, you shouldn't try to achieve a power record straight away. The development of the biceps and dorsal muscle group requires a progressive increase in working weights.

It is necessary to follow the technique and program of the training process, and not mindlessly increase the load. Only this approach will ensure the proper result. If an athlete tries to take on a weight for which he is not yet physically ready, injuries await him.

T-bar rows with a rounded lower back can damage the spinal column. It is caused by improper stance. When the hip joint is pulled back, the lower back automatically flexes.

This mistake is often associated with the choice of too large a mass of weighting materials. They pull the body downward, causing the lower back to bend dangerously. Only the correct execution of the exercise guarantees the safety of the training process and the acquisition of a muscular back.

Correct technique for performing an exercise in an incline with a narrow grip

This is a fairly effective option for quickly gaining muscle mass in the back and biceps. This exercise is rarely performed with a stationary body. Usually they resort to cheating - a deliberate deviation from the standard technique.

The narrow stance of the arms allows you to take a large working weight, but significantly increases the likelihood of injury to the sacro-lumbar spine when the athlete is physically unprepared.The style of the exercise somewhat reduces the force pressure on the broadest muscle of the back.

The lower back is heavily stressed and, with prolonged training, wears out. A pull with a narrow arm setting involves the entire paravertebral zone in the process.

Correct execution algorithm:

1. Pancakes of the required mass are strung on the working end of the bar.
2. The other end of the sports equipment rests on the floor and stands in such a way that the equipment is located between the legs.
3. Tighten the muscles of the body, keeping the back straight and bending at the lower back. The bar is tilted at an angle of 30-45 °. Bend your knees slightly.
4. Sports equipment is pulled with effort.
5. At the extreme point of the amplitude of motion, the blades are compressed.
6. On inhalation, the bar is removed from the torso, preventing the end from touching the discs of the floor surface.

Much of the technique of performing a narrow grip exercise depends on the angle of the body.

Determination of load

If the torso is parallel to the vertical plane, most of the load will be on the lats. When straightening the body, the deltoid muscle is actively involved in the work.

Therefore, the execution technique depends on which section you want to pump. To accentuate the effort on the upper back with the involvement of the small and large round muscles, the rhomboid muscle and the deltoid group in the training process, sports equipment is pulled to the chest.

In the slope, an exercise is performed to pump the lower segment of the lats, press and stabilizing muscles of the legs. To create the right tension requires pulling the T-bar to the lower back. With this technique, the starting position of the body changes. To pull the barbell to the lower back, they become close, and for the press on the chest a little further.

An important technical nuance is hand positioning. The wider it is, the more effort will be taken by the round muscle groups. A tapered and parallel grip is better at targeting the lower lats. The reverse setting of the palms more actively attracts the biceps muscle of the forearm to the training process.

To use only the back muscles without stressing the stabilizing muscle complexes, special straps are used, which are fixed on the hands. Do not squeeze your wrists when gripping the projectile with your palms. This puts excess pressure on the shoulder girdle and biceps, increasing the risk of sprains.

Initial position

It is important to take the correct starting position before starting the session. The degree of inclination of the body with a horizontal bench press is of fundamental importance. The smaller the angle, the more tension is created on the lower latissimus muscle.

When performing the exercise, it is important that the lower back remains in an anatomically natural position. The back should be kept straight at all times. Many athletes use a special athletic belt.

It is more difficult to keep your back straight with it. Therefore, it is recommended to use such a device only when working with heavy weights. It is advisable not to tighten the belt tight so that it does not interfere with proper breathing and keeping the back in the desired position.

Exercise

The technique algorithm is simple and not difficult even for novice athletes. When performing the exercise, the handles should be gently brought closer to the body, avoiding sudden jerks. For greater involvement of the spinal muscles in the sports process, it is necessary in the final phase of the amplitude to reduce the shoulder blades and press the upper limbs tightly to the torso.

With a wide elbow dilution, the posterior deltoid muscles are included in the process. The exercise must be performed with maximum amplitude until the maximum contraction of the scapular muscles and the broadest. Press on yourself is done synchronously with the exhalation movement.

In the upper peak of the amplitude, you need to pause for a second and compress the spinal muscles as much as possible. In this phase, you should not strain the biceps muscle of the forearm, otherwise it will take on the entire load.When lifting a sports equipment, keep your neck and head still.

Excessive axial stress on the upper spine can lead to a pinched nerve. On inhalation, the bar is slowly lowered. The pectoral muscles do not round or change the position of the trunk in space.

In the lower peak of the amplitude of the downward movement, a second pause is made, which allows the lats to stretch as much as possible. Then the whole cycle is repeated anew.

The correct technique for performing the exercise with a wide grip

This technique maximally loads the broadest muscle and practically excludes biceps from the training process. The range of motion is greatly reduced.

Execution algorithm:

1. Discs are hung on the working end of the bar.
2. The projectile, as with a narrow setting of the arms, must be placed between the legs, free resting on the floor at an angle of 30-45 °.
3. When lifting, the core and stabilizing muscles of the legs are strained as much as possible.
4. The knee joints should be kept slightly bent.
5. With effort, the sports equipment is pulled from the lower position to the torso.
6. At the top point of the amplitude, the scapular muscles contract as much as possible.
7. Simultaneously with the exhalation, the shell is lowered without touching the floor.

The wide grip T-bar row can be performed with an emphasis on the chest or lower back, depending on the target muscle groups that you want to pump to the maximum.

Reverse grip

The technique is aimed at high-quality study of the middle part of the back. It allows girls to acquire a flexible and graceful figure, and for men to build muscle mass and improve their strength characteristics. Reverse grip strengthens the muscular waist. It promotes the development of small instep muscles.

In an incline, the exercise is performed as follows:

1. The working weight of the sports equipment is set.
2. Grab the bar with the back setting of the hands shoulder-width apart.
3. Legs should be kept slightly bent at the knees.
4. The body is tilted forward at an angle of 45 °, keeping the sports equipment at the level of the shins.
5. The press muscles are statically tense.
6. Take a deep breath and exhale, pulling the barbell to the lower back.
7. This is followed by a second pause with the maximum contraction of the spinal muscles.
8. Simultaneously with inhalation, the bar is slowly lowered, straightening the elbow joints.

At the top point of the range of motion, you need to squeeze the shoulder blades, bringing the barbell due to the tension of the back muscles and muscles of the forearms. During the exercise, the lower back should be kept slightly arched.

How to do the lying exercise?

To achieve the proper result, you must follow the execution technique. Use a special block trainer or a regular gymnastic bench.

The technique for performing on specialized equipment is as follows:

1. The machine is loaded with the optimum weight, and the leg platform is adjusted so that the upper chest is above the support in the supine position.
2. You need to sit on the surface face down at an angle of 45 ° and grab the handles with your palms. The position of the hands can be pronated, neutral or supinated. The direction of the main part of the load depends on this.
3. The bar is lifted from the stand on outstretched arms so that it is in front of the body.
4. On inhalation, the barbell is smoothly squeezed up. At the end point of the amplitude of the lifting movement, the spinal muscles are minimally contracted. The elbows are tightly pressed against the torso. It is advisable not to lift the body off the surface and not use the power of the biceps forearm to press the T-bar.
5. At the upper peak of the amplitude of the lifting movement, you need to make a second delay.

Simultaneously with inhalation, the hands are returned to their original position. It is recommended for beginner athletes to perform the exercise with a weight of no more than 20 kg.

Number of approaches for beginners and pros

On average, male athletes do 3-4 sets of 10-15 cycles. For women, the number of repetitions and approaches remains the same. They are advised to use a working weight of 10-15 kg.Pro athletes with well-trained muscles can select the mass of weights in accordance with their own strength capabilities.

Exercise frequency to achieve results

In the gym, you need to exercise 3-4 times a week. The recommended training time is 1-1.5 hours, depending on the physical condition of the athlete. Such a scheme will allow you to achieve a good result without overloading the muscular system.

Crossfit T-Bar Rows

Exercise is part of some complex training programs. One of the most popular involves performing 20-25 pull-ups on a horizontal bar, 100 jumping rope and 75 burleys - a sports technique that consists of squats with a barbell in a standing position.

The CrossFit complex includes 5 rounds.

Another common exercise program consists of:

• 20 burles with access to the horizontal bar;
• 15 kettlebell presses with each hand;
• 20 cycles of bent-over T-bar rows.

In 25 min. you need to try to make the maximum number of rounds. The complex is characterized by high intensity and can significantly increase endurance. It is well suited for experienced athletes who have mastered the techniques offered.

Another popular crossfit program, which includes the bent-over barbell press, contains 25 kettlebell jerks, front swings with both arms, and barbell push-ups. An exercise with a T-bar row according to the plan of the complex must be done the same number of times. The required number of rounds is 5.

T-bar deadlift video

T-bar Row: