Edged manicure classic, dry, shellac, European. What's the difference with hardware and execution technology

A beautiful manicure is not only a stage of basic nail care, but also an important hygienic procedure. Edged manicure is in demand, despite the popularity of European and Japanese unedged technique. A classic manicure allows you to keep your nails in perfect condition for 2 weeks without additional care.

What is a classic trim manicure?

Trim manicure is a classic type of nail care that involves removing the cuticle from the surface of the nail rolls. The procedure is carried out with preliminary steaming of the keratinized layers of the skin around the nail in warm water, which is why this method is called "wet" manicure.

A classic manicure prepares nails for further application of any coating. Trim manicure is carried out even with the neglected state of the nails. Hand treatment with nourishing agents after the session is comparable to spa treatments, because it has a positive effect on the surface of the nail and cuticle.

Advantages of the method

Trim manicure is a classic manicure method.

Compared to other types of nail care, it has many advantages:

1. Efficiency. By cutting the cuticle, the nails retain their presentable appearance much longer.
2. Execution speed. The complete classic manicure procedure takes no more than 30 minutes.
3. Versatility. Edged manicure has no contraindications. It can be done by both men and women.
4. Additional hand care. The use of trays with useful components has a positive effect on the skin of the hands and strengthens the nail plate.
5. The manicure can be combined with other caring procedures, for example, paraffin therapy or peeling.
6. The procedure is carried out not only in salons, but also at home, subject to mastering the technique.

disadvantages

The main disadvantage of a trim manicure is the possibility of skin damage during cuticle removal. In this regard, many clients abandon the classic manicure in favor of the European one.

Improper handling of instruments can lead to infection with HIV or hepatitis. Therefore, some people prefer to carry out a trim manicure on their own in order to monitor the quality of the disinfection of the manicure accessories.

Nail service specialists do not advise doing a manicure if:

• inflammation of the nails and nail folds;
• fungal diseases;
• wounds and cuts;
• reduced blood clotting;
• diabetes mellitus.

Differences from hardware manicure, European

Hardware manicure is performed with a special device with a set of various attachments designed for nail and cuticle treatment.Such a device is used in beauty salons, as it requires professional skill to work with it.

It is suitable for various types of coatings including gel polish. Manicure takes less time, and the speed of regrowth of the cuticle will allow you to schedule the next session no earlier than 2 months later.

With hardware manicure, you do not need to soften the cuticle in the bath in advance, but only lubricate it with a special gel, and then remove one of the attachments of the device. The polishing of the nail plate and the correction of the length are also performed by the device in a few seconds.

The disadvantage of this method is its painfulness. Due to the high speed of the mechanism, unpleasant sensations are possible due to closely located nerve endings in the nail. Therefore, you should not purchase a device for a hardware manicure in order to use it at home.

European manicure is a method of nail care without the use of scissors and nippers.

When executing it:

• the length of the nail is adjusted using files;
• the cuticle is not removed, but softened, and then pushed to the edge with a pusher or an orange tree stick;
• the possibility of infection with poorly processed tools is practically excluded.

Its main disadvantage is that in order to maintain a presentable appearance, it is necessary to constantly moisturize the cuticle with cream or oil. For this reason, the lifespan of European manicure is short. It needs to be updated after 5-7 days. Trim manicure is considered the most versatile method that allows you to quickly and painlessly give your hands a well-groomed look.

Required tools

A trim manicure, the classic version of which involves the removal of keratinized skin from the nail rollers, requires a certain set of tools. They are used to polish, shape and trim the cuticles.

Basic accessories for trim manicure:

• scissors or tweezers;
• nippers;
• cuticle pusher;
• buffs for polishing;
• files with the required level of abrasiveness;
• brush to remove dirt;
• steaming bath.

The stiffness of the file must be selected depending on the thickness of the nail and the desired functional application. To correct the length, a tool with an abrasiveness of 200-400 grit is suitable, and for polishing, a hardness of 900-1200 grit is sufficient.

It is best to choose ceramic, plastic or glass files. They gently file the nail without damaging the plate. You should not buy metal files that lead to delamination and brittleness of the nail.

Additional tools are required to apply drawings and create nail designs:

1. Dots is a metal or plastic stick with a ball-shaped tip for depicting dots and circles.
2. Brushes of various thicknesses - for drawing details and performing French manicure.
3. Printing and plates with pictures (stamping kit) - for applying finished images to the nail.

Nail coating involves the application of varnishes of one or more colors, a base for varnish and a fixer. Sometimes a liquid is used to quickly dry the varnish, but in the case of a regular coating, it may not be useful.

It is also necessary to have acetone to remove the remnants of the previous nail polish. To take care of your skin after the procedure, you will need a cream and cuticle oil.

Technique of execution: a step-by-step lesson for beginners with a photo

Those who decide to master the technology of classic manicure should remember that practice is important to achieve the desired result. Already after the 5th session, the skill will be worked out sufficiently so as not to be afraid to damage the nail plate.

It is important to study in detail the sequence of execution of each step, and to be extremely careful when working with tools. A home-made trim manicure will not only save money, but also eliminate the risk of infection.

Before you get started, you need to organize your workspace.It is enough to spread a towel or napkin on the table, and also take care of good lighting.

Even if one person uses a set of tools for manicure, it is imperative to disinfect it with alcohol or an antiseptic before the session. They should also treat their hands, and especially the cuticle area.

Step 1: remove the coating

Different manicure removers are used depending on the type of coating. Regular varnish can be removed with acetone or its mixture with glycerin.

Some people prefer to use washes that do not contain acetone, but they do not always cope with a dense coating or varnish with added glitter.

Step 2: creating the shape of the nails

Correction of the length of the nail is carried out using scissors and a file. The movement of the scissors should be sharp and precise in order to remove the regrown edge in one motion. This technique does not violate the integrity of the nail plate and does not lead to delamination. You need to file nails at an angle of 90 °, without chaotic movements. The tool should point in one direction - from left to right.

It is better to start the process from the edges of the nail, and end by filing its middle. First, you need to process the nails of the little fingers, gradually moving towards the thumbs.

After adjusting the length, it is worth starting a file under the nail and making a few more movements with it to remove possible chipping.

When the desired shape and length of nails is selected, the plates should be treated with a buffing buff to give them shine and shine. In addition, this step contributes to a smoother varnish finish. It is important to perform these actions on absolutely dry hands, otherwise the nails may begin to exfoliate.

Step 3: steaming

To soften the cuticle, you need to make a nail bath. Sea salt or other components that strengthen the nail plate are dissolved in warm water. If there is contamination, you can add a little soap.

The steaming procedure should not last more than 5 minutes, since this time is enough to soften the skin... When the cuticle is steamed, you should treat the surface of the nail, as well as the area under it with a brush. Dry your hands with a cotton or paper towel to keep them dry.

Step 4: work with the cuticle

Before cutting the skin, you need to push the edges of the cuticle with a pusher. It is a reversible instrument with a rounded and sharp tip. The round side is used to treat the skin below the nail socket, and with a pointed edge, the cuticle is pushed back from the lateral ridges of the nail.

It is necessary to work with a pusher extremely carefully, without pressing on the nail, as the tool can damage its surface and lead to scratches and microcracks.

When the cuticle is no longer in contact with the nail, it must be trimmed with nippers. In order not to damage the skin, the movement of the instrument must be continuous and confident. Burrs may appear if this rule is not followed. To avoid cuts, do not grab too much of the cuticle with the nippers.

Don't miss the most popular column article: How to draw monograms on nails step by step for beginners. Instruction with photo.

Step 5: covering your nails

To protect and align the nail, a base must be applied before varnishing. Next, varnish is applied. You need to start the coating on the left side of the nail, and with 3 brush strokes, completely paint the entire area of ​​the plate.

At the end, a fixative is applied to give the nails a shine and protect them from chips. The last step in a classic manicure is the application of hand cream and cuticle oil.

Classic dry manicure with gel polish: features, technique

Edged manicure is a classic method of nail care, in which the skin of the hands is pre-steamed in warm water. This technology is not always used before applying gel polish. Instead of softening the cuticle with water, use a gel to remove it.

It is applied to the nail rollers and after a specified time, the cuticle is pushed back to the edges of the nail with a pusher or an orange stick. Therefore, this method of manicure is called dry. Compared to a conventional product, gel polish (or shellac) lasts from 2 to 4 weeks, and the technique of its application has its own characteristics.

A set of tools for work:

• fine-grained buff;
• cuticle pusher or orange stick;
• cuticle softening gel;
• lint-free napkins;
• degreaser;
• primer;
• base;
• gel polish;
• gel polish remover;
• finish (top);
• foil;
• a means for removing the sticky layer;
• cuticle oil;
• Ultraviolet lamp;
• cotton pads.

After shaping the nails and processing the cuticles, it is necessary to grind the nail plate with a buff.

Then the nails need to be degreased using a lint-free cloth, primer and base coat applied. After applying each layer, you should dry your nails under the light of an ultraviolet lamp.

When choosing a lamp for baking gel polish, you need to pay attention to the features of UV and LED devices. They differ not only in the sealing time of the varnish, but also in other characteristics.

Colored varnish nails are covered in 2-3 layers, also drying each of them with ultraviolet light. Drying usually takes no more than 2 minutes, depending on the manufacturer of the gel polish. It is important to lubricate the end parts of the nail well so that the manicure lasts longer without peeling and chipping.

The coating is fixed with a finishing agent, and then the sticky layer is removed using a napkin. This step promotes adhesion of all applied layers to each other. The last step of the session is to lubricate the skin around the nail with oil. If handled correctly, the gel polish will last about 3 weeks. This period also depends on the rate of nail regrowth.

During the manicure correction, the previous coating is removed, which is also done differently than with the classic edging method. To do this, it is necessary to well moisten a cotton pad in the gel polish remover composition, attach the disc to the nail and wrap each of them with foil.

After 15 minutes, you should massage the nail plate and remove the foil with cotton wool. The remaining coating is carefully removed with a pusher.

French manicure with shellac

French manicure is one of the most popular types. This is a classic manicure and will suit any situation. French involves painting the tip of the nail with white varnish, and a neutral shade is applied to the remaining nail plate: beige, pink or transparent varnish.

Plates are processed in the classical way. It is not necessary to use a buff for this type of coating, since shellac has excellent adhesion properties. A thin layer of primer and base are applied to degreased nails, after which they are dried under a lamp.

Then apply a colored coating and bake it for 1 min. The tip of the nail is drawn with white shellac. This should be done in 2 layers, not forgetting to dry the nails under ultraviolet light. A top coat completes the French manicure procedure.

Don't miss the most popular column article: How to build up your nails with gel polish. Instructions for nail extension for beginners. A photo.

How to avoid burrs

Burrs are skin particles that have exfoliated on the surface of the nail fold.

They can appear for several reasons:

1. Dry cuticles caused by excessive use of harsh chemicals in detergents.
2. Incorrect technique for performing a trim manicure. Cuticle removal should be done smoothly and continuously to avoid the appearance of torn edges.
3. Sawing nails from side to side and using metal files.
4. Poor circulation caused by the aging process.

Burrs cause discomfort, and often inflammation and abscess appear in their place.

Observance of several important rules will help to prevent their occurrence:

1. Mandatory use of rubber gloves when working with all types of household chemicals.
2. Technically correct execution of a trim manicure with a well-sharpened tool.
3. Using oils and creams to moisturize the skin around the nail.
4. Massage the cuticles and nail folds to improve blood flow. You can do it yourself.

To achieve a positive effect, self-massage should be done 2-3 times a day. It will take no more than 3 minutes. You should start the massage with light strokes of the hand, and gradually move on to kneading your fingers. It is enough to repeat this action 4-6 times.

Rubbing the phalanges of the fingers is the main element of self-massage. To do this, you need to clench your hands into fists and alternately rub the phalanges against each other. The massage ends with the application of a nourishing cream.

Regularly carrying out this procedure has a beneficial effect on the appearance and health of nails, and also prevents the appearance of burrs.

Expert advice on hand care after manicure

A manicure will last much longer if you take proper care of your hands after the procedure.

Nail service experts advise you to follow a few simple recommendations that will help preserve the beauty of your nails:

1. On the first day after manicure, if possible, avoid contact with warm water and steam. Therefore, it is better to refuse to visit a bath or sauna, as well as to wash dishes.
2. To avoid chipping or peeling of gel polish, all household work should be done with rubber gloves. Household chemicals and too hot water dry out the skin of the hands, which negatively affects their appearance.
3. Self filing of coated nails is undesirable. This opens the sealed end of the nail, which will certainly lead to a violation of the integrity of the manicure.
4. You must be extremely careful to remove gel polish yourself. It is necessary to use exclusively a specialized agent that softens the coating well. Excessive pressure with a pusher during removal of varnish residues leads to damage to the nail plate.
5. Manicure correction should be done every 3-4 weeks as the nail grows back.
6. To soften the skin of the hands, it is better to choose nourishing creams containing fatty oils. Light fluids do not sufficiently moisturize the skin and evaporate quickly. You need to renew the cream after each hand washing.
7. Before going to bed, you need to lubricate the cuticles with oil. This will help prevent dryness and improve circulation.
8. Regular exfoliation of dead skin particles with a peel or scrub will give your hands a well-groomed look.

What video tutorials will help you learn the correct technique of classic manicure

Video materials on how to properly care for your nails and prepare them for the procedure can help beginner manicure masters. They show all the processes and stages of a classic trim manicure session, with step-by-step instructions and comments to them by nail service professionals.

After studying these videos, you can start mastering the technique of edged manicure and take care of your hands without visiting beauty salons.

A classic manicure gives a well-groomed look and keeps nails healthy. Having learned the technique of edged manicure, you can perform the procedure at home.

Article design: Mila Friedan

Video about classic manicure

Classic manicure: