How to apply powder to gel polish. Step by step instructions correctly using a sponge, acrylic. A photo

Not all representatives of the fair sex can use gel polish due to the fact that they have cracks and chips on the surface of the decorative coating or even on the nails themselves. This is due to the excessive fragility of the nail plate.

To improve the condition of weak nails, a method has been invented, such as strengthening with acrylic powder. After being applied to the gel polish, it will protect the nail plate from negative effects.

Why apply acrylic powder to gel polish

Previously, acrylic was used only in nail extension, because it is plastic, and when it hardens, it becomes very durable. Thanks to these qualities, after a while they began to use it to repair and strengthen nails.

For strengthening, choose a transparent powder. To build up, you need camouflage colors of flesh-pink shades. They overlap the nail plate, but match its color, so this powder will be invisible. And for design they use the widest palette of colors, shades and structures of acrylic powder.

After strengthening with acrylic powder, the life of the manicure is significantly extended. Also, with its help, nail art masters perform various patterns, including voluminous ones, which look spectacular on well-groomed nails. The powder has a porous structure, therefore it is safe for the nail plate, non-toxic.

Acrylic powder has many other advantages:

• Nails look well-groomed and healthy.
• The powder removes most of the possible defects of the nail plate (chips, delamination, fractures, etc.).
• The nails are hardened and denser.
• The surface of the nails is leveled by filling microcracks with powder.
• Protects the nail plate from temperature drops, household chemicals and other aggressive influences.
• If part of the coating is damaged, you do not need to redo the entire manicure. It is enough to perform the correction on a specific nail.
• Such a manicure does not need any special care.
• It is simply removed with a special solution.

Choosing acrylic powder is not worth saving. Working with a substance of low quality, it is difficult to achieve the desired result, even if the manicure is done by a professional in his field. The powder will blur, and there can be no talk of any strengthening of nails.

How to prepare your nails

Prepare the nail plate before applying the powder.

The first step is hygienic manicure:

• Wash hands with soap and water.
• Remove varnish or other coating from nails using a special tool (it is better to choose solutions with a nutritious effect).
• Keep your hands in a warm bath to soften the cuticle (5-7 minutes is enough).
• After the bath, hands are blotted with a towel or napkin (no need to wipe dry).
• Using a special spatula or stick with a wide side, the cuticle is pushed back.
• Cuticle and dead skin are cut from the lateral ridges with special forceps (optional).
• Apply a nourishing cream to your hands.

After these manipulations, prepare the nail for the direct application of acrylic powder:

• Remove the upper glossy layer using a buff file.
• They are treated with a primer and wait for drying (it will prevent the appearance of fungal and some other diseases, improve bonding).

How to apply powder to gel polish: step by step instructions

For building:

• Special forms or tips are put on the nails;
• Next, the acrylic powder and monomer are mixed. To do this, the brush is dipped in a monomer, and then dipped in powder, and, making circular movements, envelop the brush with it. A thick drop forms on it.
• This drop is quickly transferred to the nail and spread in a thin layer over the shape. Then, with a patting, depressing motion, level the layer. It is necessary to avoid getting the acrylic mixture on the lateral rollers and cuticles, the distance between them should be at least 0.3 mm.
• After each drop of acrylic, wipe the brush with a napkin.
• Until the acrylic has completely hardened, the nail is given a natural curve using tweezers. This is also done using a mold, a straw.
• When the acrylic is completely hardened, they start filing and polishing the nails. First, use a nail file with a large grain fraction, and at the end a buff.
• Then the final design is applied.

For design:

• The base is applied first. It is allowed to dry. Some products dry in the air, some in a UV dryer (you need to read the instructions for a particular product).
• Shellac is applied to the entire surface and end sides.
• Until the gel polish has time to dry, powder is applied. If you want to cover the nail completely, then the first step is to lower the tip of the nail into a jar of powder. Then, holding your finger over the stand, apply the powder with a brush over the entire surface of the nail. You cannot touch the surface of the nail plate with a brush.
• Shake off the excess by tapping lightly on the finger.
• Dry under a UV lamp.
• Next, the nail is treated with a brush. This will help remove loose powder particles and smooth the surface a little.
• You can stop at this stage. But you can also apply a top coat of gel polish. Then the nails will be smooth, without roughness.

How to do a French manicure with clear, white acrylic powder

French manicure is versatile. It is suitable for women of all ages, for any event, as it is discreet, but at the same time effective and stylish. It is not difficult to make it with acrylic powder.

How to apply powder to gel polish is described in detail in the step-by-step instructions:

• Powder for a jacket is taken non-glossy, mostly white.
• The nails are tidy. They remove the cuticle, give shape.
• Apply gel polish. The last layer should be very thin.
• Open a jar of acrylic powder and dip the tip of each finger into it.
• Remove excess with a brush.
• Coat the gel again with varnish.

With such a jacket, the coating on the ends will not wear off, crack or chip. And it will last 2-3 weeks.

How to use colored acrylic powder

• Before applying gel polish and powder to nails, they are prepared in the classical way.
• Then a base coat is applied and cured in a lamp.
• Next, the nail plate is painted over with gel varnish of the desired color.
• Next, a second coat of varnish is applied and dried again in a lamp.
• After drying, a third layer is applied, but it does not dry out (if you need to cover the entire nail with powder) or a pattern is applied using a thin brush (if you need a powder pattern).
• The still wet gel polish is abundantly sprinkled with acrylic powder of the desired color.
• Use the UV lamp again for drying.
• Shake off the remaining powder with a stiff brush.

Mirror powder on gel polish

Mirror powder (mirror rub) is a very fine polyester powder. It is used to achieve a mirror effect. It significantly surpasses the quality of the result of gel polish with a metallic effect, as well as foil for manicure.

Mirror rubbing comes in different colors and shades. Apply this powder to gel polish, gel paint and acrylic. It's easy to use - even a beginner can handle it. Such a manicure will be resistant to water, UV rays and various solvents.

Here's how to do a mirror powder manicure:

• As with any other manicure, the nails are prepared and the base is applied.
• Next, you should apply black gel polish (other options are also allowed).
• Then, over an open jar of powder, the nail is sprinkled with a mirror rub. For this, use a special spatula.
• The excess powder is shaken off, and the rest on the nail is easily rubbed with a sponge.
• This operation is performed on each nail.
• Top covered with a finishing coat of varnish and dried under a special lamp.

Applying shimmery powder

The shimmery rubbing is similar to the mirrored one, but micro-sparkles are added to it. They create the shimmering effect. It is used not only as a decorative decoration, but also to nourish and restore nails.

It is easy to apply, just know the sequence of actions:

• The preparation of the nail plate takes place in the classical way.
• Next, the nails are covered with gel or gel varnish of the desired color.
• Still wet nails are generously sprinkled with shimmering powder.
• They shake off the excess and rub in the powder, as is the case with mirror powder.
• Then cover the coating with two layers of fixer. After each application, dry the nails under a UV lamp.

Metallic powder

The original manicure with a metallic sheen looks stylish and attracts the eyes of others. To become the owner of such nails, you just need to purchase acrylic powder for nail design. It consists of the smallest reflective particles, which gives superiority over gel varnishes with a metallic effect. There is a chrome powder on sale in many shades.

You don't have to cover the entire nail with metal powder, you can think of many other options. For example, a chrome jacket or metal painting on the nail plate. Powder is applied to the still wet gel varnish coatings.

Don't miss the most popular column article: How to build up your nails with gel polish. Instructions for nail extension for beginners. A photo.

Sponge application

The sponge is not only a tool for applying makeup. He will become an assistant in the creation of original and fashionable manicure. It is used to rub in acrylic powder for a mirror-like shine. Also, with its help, an ombre manicure is applied (on the nails, a smooth and beautiful transition is obtained without a sharp change in color). Even a beginner in manicure can master this technique.

Here is an example of using a sponge in nail design:

• The first step is to do a hygienic manicure.
• Next, a base is applied, in this case, a beige or pale pink is taken, dried with a special lamp.
• The middle part of the nail plate is covered with a tone lighter than the base.
• Next, shade the gel polish using a sponge. Thus, a smooth transition between colors is obtained.
• White acrylic powder is applied to the edge of the nail.
• Apply a top coat and dry with a UV dryer.

What mistakes can be made

Before applying powder and gel polish on nails, it is better to study the instructions and take into account possible mistakes:

• Slow work (work with acrylic as quickly as possible, as it thickens rather quickly).
• Work without a mask (when mixed with a monomeric liquid, acrylic acquires an unpleasant pungent odor).
• Neglect of antiseptic measures (the coating on the nails lasts a long time, and a fungus or other infection, being in a "locked" state for a long time, will develop).

Don't miss the most popular column article: How to draw monograms on nails step by step for beginners. Instruction with photo.

Acrylic Coating Removal Procedure

The first step is to remove the top shine from the nails. To do this, use a nail file.After that, a nail polish remover is applied to the cotton pads and placed on the nails. Each nail is wrapped in foil and left for 15 minutes.

After the coating is peeled off, using orange sticks, remove the residue. For the same purpose, special nail files are also used. After such manipulations, the nails are ready to apply a new manicure.

If you decide to do such a procedure as applying powder to gel polish, it is still better to contact nail art specialists. Then there will be an opportunity to fully enjoy all the advantages of this novelty in the world of manicure.

Video about strengthening nails with acrylic powder

Strengthening nails with acrylic powder:

Strengthening nails with acrylic powder: